BelKraft 6000 Ceramic Filter

System comes complete with mounting bracket, housing wrench, special brush for cleaning ceramics and  mounting module.

50 year conditional warranty.

The ceramics are designed to remove suspended solids and pathogenic bacteria. The ceramic elements may be used in either gravity or pressure filter housing.

• Minimum working pressure …………………… 125 psig
• Maximum working temperature …………………. 100 F
• Minimum working temperature …………………… 40 F
• Recommended flow rate ………..5 gal/min
• Recommended cleaning frequency …… every 3 to 6 months or when flow rate is noticeably lower

Contaminant Removal

Pathogenic bacteria
Cholera, Typhoid, Salmonella, Serratia, E Coli, Fecal Coliforms – >99.99% removal

Cysts
Cryptosporidium Parvum and Giardia Lamblia – I00% removal (based on tests by Arizona State University)

Sediment
Down to 0. 9 micron, 100%; 0.5 – 0.8 micron with a filter efficiency of >99.99% (based on tests by Spectrum Laboratories, Minneapolis, MN)

Standard filter elements require sterilization after cleaning. To do this, place the candle in a container of water and boil for 20 minutes. Allow the candle to cool before replacing it in the filter housing.

* NOTE: It is important to remember that the outer surface of these or any other non-self-sterilizing cartridges may be covered with harmful bacteria, so sensible hygiene precautions should be taken during handling, cleaning, refitting into the housing or disposal.